Assembling Grinding
Head
1.Loosen the locking knob, and remove the grinding head assembly from the grinder motor housing.
2.Unscrew the lock ring and remove the cutting plate, cutting blade and feed screw. Thoroughly sanitize the grind- er head, cutting plates, cutting blade, feed screw, lock ring and attachments (refer to Proper Sanitization on page 9 for information).
3.Before proceeding with assembly, wipe down outside surface of grinder motor housing with a sanitized cloth.
4.After cleaning, assemble the grinder head by inserting the feed screw into the barrel of the grinder head with the longer end of the hex shaft projecting through the back of the grinder head barrel (Figure 2).
|
| Barrel |
| |
|
|
|
|
|
|
|
|
| |
|
|
| Feed Screw | |
Throat |
|
| ||
|
|
|
| |
|
|
|
|
|
Figure 2. Feed screw installation
5.Carefully slide the cutting blade on the square shaft on the front of the feed screw (Figure 3).
Figure 3. Cutting blade installation
6.Choose one of the three cutting plates.
7. Slide the cutting plate over the shaft and align with the locking pin located at the bottom of the barrel of the grinder head. ( Figure 4).
locking pin
Figure 4. Cutting plate installation
8.Screw the lock ring on to the barrel clockwise to secure the assembly.
Model H6248 Meat Grinder |
