Grizzly H8232 Operations, Loading, Framing Nailer, Finish Nailer, To load your framing nailer

OPERATIONS

Loading

Framing Nailer

Nail Size	1⁄8" Shank Diameter
Nail Strip Angle	34º Round Head
Length	2"–31⁄2"
Magazine Capacity	60 Nails

To load your framing nailer:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Grip the nailer firmly and point the nose down, then pull the magazine pusher back until the catch lever engages, as shown in Figure 3.

Figure 4. Loading nails into the magazine.

4.Tilt the nailer to slide the nails all the way down to the nose.

5.With one hand on the magazine pusher for control, release the magazine catch and slowly allow the pusher to press against the nails.

Pusher

Figure 3. Sliding magazine pusher back

and engaging catch lever.

3.Insert a strip of nails, pointed-end down, into the magazine as shown in Figure 4.

Finish Nailer

Nail Size	16 Gauge
Nail Length	11⁄4"–21⁄2"
Magazine Capacity	74 Nails

To load your finish nailer:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Grip the nailer firmly, and pull the magazine pusher back until the catch lever engages, as shown in Figure 5.

Figure 5. Sliding magazine pusher back.

Model H8232 3-Piece Framing/Finish/Palm Nailer Kit -9-