Grizzly H8232 owner manual Introduction, Foreword Tool Data

INTRODUCTION

Foreword Tool Data

The specifications, details, and photo- graphs in this manual represent the Model H8232 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.

If you have any comments regarding this manual, please write to us at the following address:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

E-Mail: manuals@grizzly.com

Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

Framing Nailer

Nail Size	1⁄8" Shank Diameter
Nail Strip Angle	34º Round Head
Nail Length	2"–3½"
Magazine Capacity	60 Nails
Air Inlet Fitting	¼" NPT
Weight	81⁄2 lbs.
Operating Air Pressure	80–110 PSI
Maximum Air Pressure	120 PSI

Finish Nailer

Nail Size	16 Gauge
Nail Length	11⁄4"–21⁄2"
Magazine Capacity	74 Nails
Air Inlet Fitting	1⁄4" NPT
Weight	5 lbs.
Operating Air Pressure	60–100 PSI
Maximum Air Pressure	120 PSI

Palm Nailer

Nail Size	5d–70d
Blows Per Minute	1000
Average Air Consumption	5 CFM
Air Inlet Fitting	1⁄4" NPT
Weight	1.9 lbs.
Operating Air Pressure	70–100 PSI
Maximum Air Pressure	120 PSI

Model H8232 3-Piece Framing/Finish/Palm Nailer Kit -5-