Grizzly H8259 owner manual Setup, Set Up Safety Unpacking, Inventory, Box Contents Figure Qty

SECTION 3: SETUP

Set Up Safety Unpacking

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

The Model H8259 is a heavy machine. DO NOT over-exert yourself while unpacking or moving your machine—get assis- tance.

The Model H8259 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

Inventory

After all the parts have been removed from the box, you should have the following items:

Box Contents: (Figure 3)		Qty
A.	10" x 18" Benchtop Lathe (Not Shown) ..... 1
B.	Live Center MT#2	1
C.	Spur Center MT#2	1
D.	Quill Handwheel Crank	1
E.	Hex Wrenches 3, 6, 8mm	1 Each

B

C

D

E

-10-

Figure 3. Box contents.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them, or for the sake of expediency, replacements can be obtained at your local hardware store.

H8259 10" x 18" Benchtop Lathe