SECTION 4: OPERATIONS
Operation Safety
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear a face shield, respirator, and hearing protection when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
H8259 10" x 18" Benchtop Lathe
Changing Speeds
To change speeds, the belt in the headstock must be adjusted. A chart on the rear of the lathe bed shows the belt positions needed to make the lathe run at the desired speed.
To change speeds:
1.UNPLUG THE LATHE FROM POWER!
2.Loosen the belt tension screw and motor mount screw (Figures 8 & 9). Be sure the belt tension lever moves freely to release ten- sion from the belt .
Belt Tension Lever | Belt Tension Screw |
|
