Grizzly Model G1023zx3 instruction manual Motor Brace, Guard Bracket

Motor Brace

A red motor brace has been installed for shipping purposes. Remove this brace before continuing with assembly. The bolts that secure the brace should be screwed back in at the locations from which they came.

Motor Brace

Installed For

Shipping Only!

Figure 12b. Motor brace.

Guard Bracket

NOTICE

The blade guard mounting bracket (Figure

13)is supplied with the Shop Fox® Fence. To install the blade guard assembly:

1.Thread the 5Ú8"-18 blade guard mounting shaft into the mounting location on the back of the table saw base as shown in Figure 13.

2.Secure the blade guard mounting shaft with the included 5Ú16"-18 hex bolt.

3.Slide the loosely assembled bracket onto the blade guard mounting shaft and tem- porarily hand tighten the nuts as shown in Figure 14.

G1023Z Series Heavy-Duty 10'' Table Saw

Blade Guard

Mounting Shaft

Figure 13. Attaching the 5Ú8"-18 blade guard

mounting shaft.

Blade Guard

Mounting Bracket

Figure 14. Blade guard mounting bracket

-21-