Use caution and remain alert when working around the saw blade. Failure to follow this warning could result in serious personal injury or death.
4.Next, set a straightedge against the face of the saw blade and the blade splitter as shown in Figure 20. If the blade splitter is properly aligned, please skip ahead to Page 26; otherwise, continue with the next step.
!
Figure 20. Guard in line with blade.
5.If the blade splitter is to the right of the blade as shown in Figure 21, simply add washers between the splitter and the front mounting bracket, and adjust the rear splitter support as shown in Figure 22.
Add washers here to move back of split- ter to the left.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Splitter |
|
|
|
|
|
|
|
|
| Add washers |
| ||
|
|
|
|
|
|
|
|
|
|
| here to move |
| ||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
| front of split- |
| ||
|
|
|
|
|
|
|
|
|
|
| ter to the left. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blade
Figure 21. Improper splitter/blade alignment.
Adjusted
Rear Splitter
| Adjustment |
| Screw |
| Front Support |
| Bracket |
Proper Alignment | Added Washers |
Figure 22. Proper splitter/blade alignment.
G1023Z Series |
