Never allow hands or arms to be above or behind the saw blade. Should kickback occur, the hands and arms can be pulled into the saw blade. Serious personal injury could result.
Always use push sticks, featherboards, push paddles and other safety accessories whenever possible to increase safety and control during operations which require the blade guard and splitter to be removed from the saw. Failure to follow this warning could result in serious personal injury.
4.Turn the saw on.
5.When the blade has reached full speed, per- form a test cut with a scrap piece of wood.
6.If the cut is satisfactory, repeat with your fin- ish stock.
Always turn the saw off and wait until the blade has come to a complete stop before adjusting the fence. Failure to follow this warning could result in serious personal injury.
7.Rotate the workpiece as shown in Figure 38.
8.Perform the second cut to complete the rab- bet cut.
Always replace the blade guard after dado- ing is complete. Failure to follow this warn- ing could result in serious personal injury.
Figure 38. Rabbet cutting. |
|
G1023Z Series |
