Grizzly T23092 owner manual Identification & Controls

Identification & Controls

B

A

K

I

J

C

D

E

F

G

H

Figure 3. Model T23092 identification and controls.

Refer to Figure 3 and the following descriptions to gain an understanding of the features and controls of this spray gun. Be sure to read the entire manual before beginning spraying operation to ensure a safe and efficient experience.

A.Fluid Control. Controls the volume of material that travels through the fluid nozzle and past the atomizer cap.

B.Pattern Control. Adjusts the spray output between a round pattern and a wide fan.

C.Storage Hook. Allows the spray gun to be temporarily stored in a vertical posi- tion to avoid material spills.

D.Atomizing Cap. Atomizes the mate- rial as it is sprayed from the nozzle. Adjusts for horizontal or vertical spray stroke patterns.

E.Fluid Nozzle. Sprays the material past the atomizer cap.

F.Vacuum Relief Hose. Allows air to flow into the fluid cup as needed to prevent a vacuum build-up.

G.Fluid Cup Lock Lever. Releases/ engages pressure between the cup hooks and pins.

H.Fluid Cup. Holds the finish material to be sprayed.

I.Cup Hook & Pin. When pressure is applied by the lock lever, secures the lid assembly to the cup.

J.Two-Stage Trigger. Stage one only releases compressed air for blowing off the work piece. Stage two sprays material. Lightly squeeze the trigger for stage one or squeeze the trigger all the way to spray material.

K.Air Inlet. Provides a 1⁄4" NPT connec- tion for the compressed air hose.

Model T23092 High-Pressure Spray Gun -5-