27
ENGLISH
Home networK ------------------------------------------------------------------------------------------------------------
wireless network settings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
»Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that suppor t DHCP obtain the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1 Open the menu with »menu«.
2 Select »CONNECTED APPS« with »
v
« or »
Λ
«
and confirm with »oK«. Menu is displayed.
3 Select »Network Settings« wit h »
v
« or »
Λ
«
and confirm with »oK«.
– »NETWORK SETTINGS« menu is displayed.
4 Select »Connection« with »
v
« or »
Λ
« and
then select »Wireless« with »
<
« or »
>
«.
5 Select »Connection Type« with »
v
« or »
Λ
«
and then select »Automatic« with »
<
« or
»
>
«.
6 Select »Select Access Point« with »
v
« or
»
Λ
« and confirm with »oK«.
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
7 Select the network that you want to connect
with »
v
«, »
Λ
«, »
<
« or »
>
« and confirm with
»oK«.
– Wireless connection password screen is
displayed.
8 Select the required character with »
v
«, »
Λ
«,
»
<
« and »
>
« and move to the next character
with »oK«.
– Select »ABC« for uppercase and »abc«
for lower case and confirm with »oK«.
– Select »?@123« for numbers and symbols
and confirm with »oK«.
– Enter the password, select »Confirm« with
»
v
«, »
Λ
«, »
<
« or »
>
« and confirm with
»oK«.
note:
7 In WEP encryption system, more than one
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
9 Select »Connect« with »« (red) to establish
the modem connection.
– The mesage »Testing ... Please waite«
appears.
10 Press »« (green) to make sure that the
network connection is established wit h the
current settings.
– The messages »Testing ... Please waite«
appears, after successfull announcement
the messages »Connecting To Gateway:
Successful« and then the MAC address.
11 Press »menu« to end the setting.
note:
7 If you do not have a dynamic network,
follow the instructions in manual connection
section.