ENGLISH
56
speCiAl settinGs ----------------------------------------------------------------------------------------------------------
searching for television chan-nels from the cable provider automatically
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
«
or »
Λ
« and press »oK« to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »oK« to confirm.
4 Select the line »Automatic Channel Scan«
with »
v
« or »
Λ
« and press »oK« to con-
firm.
– The menu appears.
5 Select the line »Country« with »
v
« or »
Λ
«
and press »oK« to confirm. In the country se-
lection menu, select the country with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »oK« to confirm.
6 Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7 Select the line »Cable Scan Type« with »
v
«
or »
Λ
« and set the option »Quick« or »Full«
with »
<
« or »
>
«.
– The search function »Quick« sets the chan-
nels according to the information provided
by your cable provide in the transmission
signal.
– If the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support t he search t ype
»Quick«
.
note:
7 You can accelerate the search. To do this,
you need information about the frequency
and
network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
8 Start the scan with »« (red).
– All channel and favourites lists will be
deleted and compiled anew.
note:
7
After starting the scan, a securit y query will
appear. Press »« (green) to confirm the
option »Yes«.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the search by pressing
»menu«.
9 Press »menu« to end the setting.
searching for television channels from the cable provider manu-ally
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
« or »
Λ
«
and press »oK« to confirm.
Select the option »Cable�� with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »oK« to confirm.
4 Select » Digital Manual Tuning« with »
v
« or
»
Λ
« and press »oK« to confirm.
– The menu appears.
5 Enter the four-digit frequency with »1 ... 0«
and press »oK« to confirm.
–
The search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
6 Press »menu« to finish the setting.