FRONT PANEL DESCRIPTION, cont'd.

BEEP - The 'beep' tone is provided to indicate that entries have been accepted or to notify of error. Press this button to enable or disable the 'beep'.

VFO - Press to place the receiver in the normal variable frequency tuning mode (VFO). Select desired fre- quency, mode, attenuator, synchronous detector, AGC, Bandwidth, etc.

SKIP - In the memory mode, press to skip the current memory channel for a Scan operation. An 'S' will be displayed to the right of the selected memory channel number. When an 'S' is displayed next to a selected memory channel number, press this button to restore the memory channel for scan operation.

SW BAND - Pressing the SW BAND button when SWW has been selected with the BAND button (see 12) will cause the '= portion of the SW - METER display on the LCD to flash for approximately 2 seconds. During this 2 second interval, entering the meter designator for the desired meter band will cause the receiver to go to the low end of the frequency range for the desired meter band. The frequency ranges for the defined meter shortwave bands are as shown in the 'Shortwave Band Designators' table which follows.

Shortwave Band Designators

Band

Low Freq

High Freq

120 Meter

2300 kHz

2500 kHz

90 Meter

3200 kHz

3400 kHz

75 Meter

3900 kHz

4000 kHz

60 Meter

4750 kHz

5060 kHz

49 Meter

5950 kHz

6200 kHz

41 Meter

7100 kHz

7600 kHz

31 Meter

9500 kHz

9900 kHz

25 Meter

11,600 kHz

12,100 kHz

22 Meter

13,570 kHz

13,870 kHz

19 Meter

15,100 kHz

15,800 kHz

16 Meter

17,480 kHz

17,900 kHz

13 Meter

21,450 kHz

21,850 kHz

11 Meter

25,600 kHz

26,100 kHz

DEL - Press and hold for three seconds to delete a selected memory channel. An audible beep indicates that the selected memory channel has been deleted.

SCAN - Pressing this button starts scanning of the current block of 10 channels. The receiver will stop at each programmed memory channel for 5 seconds, then increment to the next memory channel. Channels programmed for SKIP will not be scanned. Press this button again to stop the scan operation.

16. Direct- Key-Input

Numeric Keys - Keys 0 thru 9 plus the'.' key are used to make direct numeric entries of frequencies, memory channel numbers and meter band designators.

CLR LOCK - Press this key to clear an incorrectly entered frequency or other value. Pressing and holding this button for three seconds will cause the receiver to be locked in its present configuration. All front panel push button controls (except for the power button) as well as the tuning knob will be ineffective, and "LOCKED" will appear on the LCD display. To return to normal operating mode, once again press the CLR LOCK key for three seconds.

17.Signal Strength Meter - This meter indicates the relative received signal level in S-units, and dB above S9. Each S-unit between S1 and S9 equals an approximate 5 dB change in received signal strength. Each dB number above S9 represents a 10 dB increase in received signal strength.

18.SET Keys

CLOCK - Pressing this button will display the current time of the current clock. After three seconds, the display will revert to the current frequency. Pressing and releasing this button while the time is displayed will toggle the time display between the two clocks (local or alternate). The timer will operate according to the last displayed clock time. See section on 'SETTING THE 24 HOUR CLOCKS' on page 21.

TIMER - Pressing this button will activate the timer mode. If the Timer has been activated, the 'TIMER' symbol will be displayed even after the receiver is turned off. The receiver will automatically turn on and off as programmed. See section on 'SETTING TIMER ON/ OFF TIMES' on page 22.

LAMP - Press to turn the display backlighting on or off. With internal battery operation, the backlighting automatically turns off after a short delay following a function change or retuning of the receiver in order to prolong battery life. Also, the receiver senses Battery or AC operation, and allows the lamp to remain lit if on AC.

19.Speaker - This is the opening for the internal speaker for the SATELLIT 800 MILLENNIUM RECEIVER.

13

Page 11 Page 13
Page 12
Image 12
Grundig 800 manual Front Panel DESCRIPTION, contd, SET Keys
Page 11 Page 13

800 specifications

The Grundig 800 is a prime example of cutting-edge technology and classic design working in perfect harmony. This high-end audio product embodies superior sound quality, making it a sought-after choice for enthusiasts and casual listeners alike.

One of the standout features of the Grundig 800 is its advanced sound reproduction system. Equipped with powerful speakers and an efficient amplifier, it delivers crisp highs, rich mids, and deep lows. The sound stage created by the Grundig 800 allows listeners to experience their favorite music in a way that feels immersive and dynamic, as if they were part of the live performance.

In terms of connectivity, the Grundig 800 doesn't disappoint. It comes with various input options including Bluetooth, USB, and auxiliary ports, making it compatible with a wide range of devices. This versatility means users can easily connect their smartphones, tablets, or laptops to enjoy their favorite playlists or radio stations without any hassle.

The design of the Grundig 800 is equally impressive. Its sleek and modern aesthetics are complemented by a user-friendly interface. The clear display and intuitive controls ensure that users can navigate through options with ease. The use of high-quality materials gives the unit a premium feel and longevity, ensuring that it remains a staple in any audio setup for years to come.

Additionally, the Grundig 800 incorporates several cutting-edge technologies that enhance its performance. Features such as Digital Signal Processing (DSP) allow for optimized sound adjustments tailored to different environments, ensuring that audio playback is always at its best, regardless of the room’s acoustics. Furthermore, energy-efficient components contribute to a lower carbon footprint while maintaining high performance.

The Grundig 800 also places an emphasis on user experience with its smart features. Integration with voice assistants allows for hands-free control, making it simple to adjust settings or play music without needing to physically interact with the device. This convenience is a significant draw for modern users who lead busy lives.

In conclusion, the Grundig 800 stands out as a remarkable audio solution that combines exceptional sound quality, versatile connectivity, and intelligent features into a sleek and stylish package. Whether for home use, parties, or simply enjoying a quiet night in, the Grundig 800 represents the perfect blend of function, form, and cutting-edge technology.
Top Page Image Contents