SPECIAL USE FEATURES AND FUNCTIONS
The SATELLIT 800 MILLENNIUM receiver has several special features that are referred to in the main body of this Owner's manual but may require additional explana- tion.
LOCK ALL ENTRY TO KEYPAD
The receiver front panel buttons with the exception of the
button and 'TUNING' knob may be locked or
disabled by pressing and holding the 
button for 3 seconds.
Press the 
button and hold for 3 seconds. A
confirmation beep will be heard when the 
is
pressed. 
will appear on the front panel display after 3 seconds to indicate that the front panel buttons and TUNING control are locked.
Press 
again for 3 seconds to unlock the front panel buttons and tuning control. The beep will again be heard when the button is pressed and the 
indicator on the front panel display will disappear after 3 seconds, indicating that the TUNING control and front panel buttons have been released.
BROADCAST BAND TUNING STEP SIZE
In the AM broadcast band, the SATELLIT 800 MILLENNIUM receiver increments the frequency in
10 kHz steps when pressing the 
and 
buttons. The 10 kHz step size is practical for tuning the U.S. and Canadian broadcast bands. However, the step size can be changed to 9 kHz to permit practical tuning of Euro- pean broadcast stations. The tuning step size is held in nonvolatile memory and thus is not lost during power failure or battery changing. To select the alternate step size:
With POWER OFF Press and hold the 
button
while pressing the 
button to put the SATELLIT 800 MILLENNIUM receiver in the POWER 'ON' mode.
If the step size was 10 kHz prior to performing the above procedure, then the 9 kHz step size for the broadcast band is now programmed. To change back to 10 kHz, repeat the same procedure.
DELETE ALL MEMORY CHANNELS
If it is desired to delete all programmed memory channels, perform the following procedure:
With POWER OFF, Press and bold the 
button
while pressing the 
button to put the SATELLIT 800 MILLENNIUM receiver in the POWER 'ON' mode.
Hold the 
button until a confirmation beep is heard to indicate that ALL memory locations have been cleared.
AUTOMATIC BANDWIDTH SETTING WITH MODE SELECTION DISABLE (ENABLE)
The SATELLIT 800 MILLENNIUM receiver permits automatic setting of the bandwidth appropriate for each mode of detection. For example, 6.0 kHz bandwidth would be selected automatically for AM mode operation, and 2.3 kHz bandwidth would be selected for SSB mode. Of course, pressing the 'BANDWIDTH' button temporarily overrides the automatic setting until a mode change is made. The setting, automatic or manual bandwidth selection with mode, is held in nonvolatile memory and is not lost during power loss or during battery changing. To disable the automatic bandwidth with mode;
With POWER OFF, Press and hold the 'BANDWIDTH'
button while pressing the 
button to put the receiver in the POWER 'ON' mode.
To enable 'Automatic Bandwidth Selection with Mode' operation, repeat the same procedure.
25
