16
Setting and storing radio stations

Automatic station search

After the hi-fi system has been connected to the mains for the first
time, the device in tuner mode searches for the 40 stations with the
best reception and stores them.
1After connection, switch on the hi-fi system by pressing
»TUNER/BAND«.
– Display: »FM«, the frequency in rapid run-through and
»PROG«.
– The search has started. After the search has finished, you will
hear the station stored at preset position 01.
Notes:
The automatic station search can be interrupted by briefly
pressing »7«.
The automatic station search can be repeated any time by
pressing and holding down »PROG./RAND./Ȅ« until the
frequency display switches to rapid run-through. The stations
stored previously will be deleted.

Automatic station search

1Switch on the hi-fi system by pressing »TUNER/BAND«.
– Display: »TUNER«, then the wave band and frequency or
station name.
2Press »TUNER/BAND« to select the frequency band
(FM or MW).
– Display: »FM« or »MW«.
3Activate the station search by pressing »cTUNING/
ALBUM x« until the frequency display changes to rapid
run-through.
– The search stops when a station is found.

Manual station search

1To move the frequency forward in steps, briefly press
»cTUNING/ALBUM x« several times.
– The frequency changes in 50 kHz steps (FM) or 9 kHz steps
(MW).
SETTINGS ______________________________________________
02
FM 97.55
16
TUNER
MHz
FM 87.65
MHz
PROG
f
16
ENERGY
f
PROG
!
02_CDS_6580_ SPCD.ENG 28.09.2005 15:11 Uhr Seite 16