Grundig DR 5400 DD Connecting the antennas, Connecting the power cord, Connection And Preparation

CONNECTION AND PREPARATION _

Connecting the antennas

	R	TV
FM 75 Ω	AM LOOP

1Plug the cable of the rooftop antenna into the FM antenna socket »FM 75Ω«.

Note:

If no rooftop antenna is available, use the auxiliary antenna supplied. This antenna provides reasonably good reception of local FM (VHF) stations. Do not shorten the auxiliary antenna.

O	Ω	AM LOOP
FM 75
EO
R		SCART

2For medium wave reception, plug the cable of the supplied MW frame antenna into the »AM LOOP« socket.

Note:

In order to prevent interference, place the MW frame antenna as far as possible from the home cinema system or other sources of interference.

		Connecting the power cord
			1	Plug the power cord (»~AC IN«) into the wall socket.
~AC IN		SPEAKER		Note:
	SW	C RS LS
DO NOT OPEN				If the DVD receiver does not	react	when the buttons	are
CAUTION
RISK OF ELECTRIC SHOCK
CLASS 1	CAUTION	CAUT		pressed, this may be caused by electrostatic discharge in the
LASER PRODUCT	SUBWOOFER	SPEAKER IM
IMPEDANCE 10 OHMS		6-8 OH
				area. In this case pull out the mains plug and insert it into the
				socket again after a few seconds.

Inserting batteries in the remote control

1Open the battery compartment by pressing the marked area

and pulling down the cover.

2 When inserting the batteries (2 x 1.5 V, LR 06/UM 3/AA), observe the polarity marked on the battery compartment.

3 Close the battery compartment.

Note:

If the DVD receiver no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage resulting from leaking batteries.

Environmental note:

Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.

ENGLISH

15