Grundig DR 5400 DD manual Checking the volume with a test tone, English

SETTINGS ______________________________________________

Language Video Audio Setting Rating

Checking the volume with a test tone

A test signal can be created for each connected speaker to check the volume level. »Off« is the default setting.

Dynamic Range		On
C. Delay		0ms
S. Delay		0ms
Downmix 2.1		Off
	Test Tone

LC

SW

1Select the »Setting« item in the main menu with »a« or »s« and press »OK« to confirm.

2Select »Test Tone« with »A« or »S« and press »OK« to confirm.

– A menu screen appears showing each test tone.

R– The test tone sounds in turn from the left front speaker, the central speaker, the right speaker, the surround speakers and the subwoofer.

3Press »7« to finish the test tone.

LS RS

To cancel press Stop

Setting the volume level for the individual channels

L-CH 0

L-CH +4

C-CH 0

Depending on the current operating mode (see the loudspeaker indicator on the DVD receiver), you can adjust the volume to the listening position. You can make this setting either with or without the test tone. The volume impression should be about the same for all channels. The individual volumes can be adjusted within a range of -6 to +6 dB.

When entering the settings, if no button is pushed for more than 5 seconds, the DVD receiver quits the menu automatically. Any altered settings are saved.

1Press »SPK LEVEL« to open the menu for setting the level.

–Display on the DVD receiver: e.g. »L-CH 0«.

2Set the volume of the front left speaker using »– ￿ « or »￿ +«.

–Display on the DVD receiver: e.g. »L-CH +4«.

3Press »SPK LEVEL« to start the setting for the centre speaker.

– Display on the DVD receiver: e.g. »C-CH 0«.

4 To set	the central speaker (»C-CH	0«),	the right	front
speaker	(»R-CH 0«), the surround	speakers	(»SL-CH	0«

and »SR-CH 0«) or the subwoofer (»SW-CH 0«), repeat steps 2 and 3.

ENGLISH

21