S450DLX OWNER’S MANUAL

ACTIVATING AND DEACTIVATING

THE ALARM CLOCK

Press and release the TIMER A or TIMER B button. ‘Timer A’ or ‘Timer B’ flashes in the display. While it flashes, press ALARM over and over. A bell “,” speaker or nothing appears in the display next to ‘Timer A’ or ‘Timer B’. Select the bell icon to activate the alarm and set the alarm to go off with a beeping sound. Select the speaker icon if you wish to wake up to the last radio station tuned to. If nothing is selected the alarm will be deactivated. Set the volume to a level you want to hear.

USING THE SNOOZE FEATURE

(top right of radio)

To delay the alarm, the snooze feature can be activated by pressing the SNOOZE button when the alarm turns on. Once pressed, the alarm will activate again in 5 minutes. This can be repeated up to 4 times.

USING THE LINE IN/OUT SOCKETS

These sockets are on the right side of the S450DLX, an 1/8 inch stereo type (3.5 mm). An external audio device (such as an MP3 player) can be played by connecting an AUX line from the device into the Line-In socket. The Line-Out socket can be used to feed audio from the S450DLX to amplified external speakers.

USING THE EARPHONE JACK

The earphone jack can be used with stereo headphones using an 1/8 inch (3.5 millimeter) plug. FM sound is in stereo if the signal is sent in stereo and the ST position is selected with the BANDWIDTH switch.

13

Page 13
Image 13
Grundig S450DLX Activating and Deactivating Alarm Clock, Using the Snooze Feature, Using the Line IN/OUT Sockets