SC 910 page 2
|
| INDEX | |
Additional information for units sold in |
|
| |
Deutsch | .....................Seite 4 D | ||
Great Britain: | |||
Units sold in GB are suitable for operation from a |
|
| |
240 V AC, 50/60 Hz mains supply. |
|
|
Mains plug
This apparatus is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1Remove fuse cover and fuse.
2Fix new fuse which should be a BS1362 5 AMP, A.S.T.A. or BSI approved type.
3Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 A.
Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
1Connect the blue wire to the terminal marked N or coloured blue or black.
2Connect the brown wire to the terminal marked L or coloured brown or red.
3Do not connect either wire to the earth terminal in the plug, marked E or e or coloured green or
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
If in doubt, consult a qualified electrician.
English | page 11 | GB |
|
|
|
|
|
|
Français | page 18 | F |
|
|
|
|
|
|
Italiano | pagina 25 | I |
|
|
|
|
|
|
Português | página 32 | P |
|
|
|
|
|
|
Español | página 39 | E |
|
|
|
|
|
|
Nederlands | pagina 46 | NL |
|
|
|
|
|
|
Dansk | side 53 | DK |
|
|
|
|
|
|
Svenska | sida 60 | S |
|
|
|
|
|
|
Suomi | sivu 67 | FIN |
|
|
|
2
