Xantrex Technology XDC manual CANbus Error Codes, Multichannel Error Codes

Error Messages

CANbus Error Codes

CANbus Error Codes

Table C.11CANbus Error Codes

Error	Error Message Description
code
+1701	CANbus hardware missing
	The CANbus option is not installed on the controller card, or controller card is
	not present.
+1702	CANbus device specific error
	An error has occurred on the CANbus circuit. Probable causes are AC input
	too low, AC input not secure, controller card not securely fastened or other
	noise sources.
+1703	CANbus input buffer corrupted.
+1704	CANbus input buffer corrupted.
+1705	CANbus input buffer overrun.
	Data is sent on the CANbus faster than the CPU can process.
+1706	CANbus output buffer overrun.
	Data cannot be transmitted fast enough.

Multichannel Error Codes

Multichannel functionality is only available with the 6000 Watt power supply.

Table C.12Multichannel Error Codes

Error	Error Message Description
code
+1800	Multichannel general error
	An error has occurred while sending multichannel commands. One such
	cause is sending a command that is too long.
+1802	Multichannel address taken
	The multichannel address configured for this unit has already been assigned
	to another unit on the CANbus network.
+1803	Multichannel originator not responding
	The originator of the message is not responding to the handshaking.
+1804	Multichannel recipient not responding
	The recipient of the message is not acknowledging the reception of the
	command.
+1805	Multichannel command overwritten
	A received command through the CANbus has been overwritten.

Release 3.0 221