Xantrex Technology XDC manual TEMPerature Sub-Register, Standard Event Status Register

Remote Operation

SCPI Commands for Digital Interfaces

TEMPerature Sub-Register

This shows whether the temperature of critical components is near or over the maximum operating temperature.

Table 4.19 TEMPerature Sub-Register

Bit	Bit Weight	Bit Name	Description
0	1	Over TEMperature	Set if the power supply temperature
			exceeds the maximum operating
			temperature.
1	2	High TEMperature	Set if the power supply temperature
			exceeds 90% of the maximum
			operating temperature.

Standard Event Status Register

The standard event status register sets bits for specific events during power supply operation. All bits in the standard event status registers are set through the error event queue. The register is defined by 488.2 and is controlled using 488.2 common commands, *ESE, *ESE?, and *ESR?.

Figure 4.6 summarizes the standard Event Status Register

Operation Complete		0
	Not Used	1
	Query Error	2		Not Used	0
Device Dependent Error		3
				Not Used	1
	Execution Error	4
				Not Used	2
	Command Error	5
				Summary of QUESTionable Status	3
	User Request	6
				MAV	4
	Power On	7	+
					5
	Reserved	8		RQS/MSS
					6
	Reserved	9
				Summary of OPERation Status	7
	Reserved	10
	Reserved	11		Status Byte
	Reserved	12
	Reserved	13
	Reserved	14
	Reserved	15
	Standard Event Status Register
Standard Event Status Register
Figure 4.6	IEEE 488.2 Status Register and Status Byte

Release 3.0 153