Xantrex Technology XDC manual Been lost. See Query Error List on, Device-Specific Error List on

Remote Operation

SCPI Commands for Digital Interfaces

Table 4.20 Standard Event Status Register

Bit	Bit Weight	Bit Name	Description
0	1	Operation	Set if KOPC command has been received
		Complete	and all pending operations have been
		(OPC)	completed. The message, Event –800
			Operation Complete, is loaded into the
			Error/Event Queue.
1	2	Request Control	Not implemented. Always set to 0.
		(RQC)
2	4	Query Error	Set if an attempt is being made to read
		(QYE)	data from the output queue when no
			output is either present or pending.
			Suggests that data in the output queue has
			been lost. See “Query Error List” on
			page 219 for possible error codes.
3	8	Device Dependent	Set if there is a device-specific error. See
		Error	“Device-Specific Error List” on page
		(DDE)	218 for possible error codes.
4	16	Execution Error	Set if a program data element, following a
		(EXE)	header, was evaluated by the power
			supply as outside of its legal input range,
			or is otherwise inconsistent with the power
			supply’s capabilities. Suggests that a valid
			program message could not be properly
			executed due to some power supply
			condition. See “Execution Error List” on
			page 216 for possible error codes.
5	32	Command Error	Set if an IEEE488.2 syntax error has been
		(CME)	detected by the parser, an unrecognized
			header was received, or a group Execute
			Trigger was entered into the input buffer
			inside an IEEE 488.2 program message.
			See “Command Error List” on page 216
			for possible error codes.
6	64	User Request	Set if the bit is unmasked and the
		(URQ)	instrument wishes to support a 488.2 user
			request event. An event occurs when the
			instrument detects the activation of a user
			request local control. The message, Event
			–600 User Request, is loaded into the
			Error/Event Queue.
7	128	Power ON	Not implemented
		(PON)
8–15		Reserved	Reserved for possible future use by IEEE.
			Bit values are reported as zero.

154 Operating Manual for XDC Series Power Supply