Xantrex Technology XDC Table B.7Commands for Fold Protection, Table B.8Commands for Triggering

204	Table B.7Commands for Fold Protection
	Function	SCPI Command	Description	Query
	Set Output Fold Delay	[:]OUTPut[<channel>]:PROTection:FOLD:DELay <delay>	Set the delay time (seconds) before fold	Yes
			protection is triggered.
	Set Output Fold Mode	[:]OUTPut[<channel>]:PROTection:FOLD[:MODE]	Select which regulation mode to fold back	Yes
		{NONECCCPCV}	(None,CV, CC, CP)
	Query Fold Protection	[:]OUTPut[<channel>]:PROTection:FOLD:TRIPped?	Query if fold protection has tripped	N/A
	Tripped
	Table B.8Commands for Triggering
	Function	SCPI Command	Description	Query
	Set Immediate Initiation of	[:]INITiate[<channel>][:IMMediate]	Initiate a triggered event or sequence	N/A
	Trigger System
	Set Trigger Source	[:]TRIGger[<channel>][:SEQuence]:SOURce	Sets the trigger source for triggered	Yes
		{BUSEXTernalIMMediateNONE}	setpoints
	Table B.9System Commands
	Function	SCPI Command	Description	Query
	Query System Error	[:]SYSTem[<channel>]:ERRor[:NEXT]?	Returns the next error in the instrument’s	N/A
			error queue
	Recall Default Factory	[:]SYSTem[<channel>]:RECall:DEFault	Restore the factory preset values	N/A
	Preset
	Select Remote Control	[:]SYSTem[<channel>]:REMote:SOURce	Select the remote control source	Yes
	Source	{RS232GPIBAVOLtageACURrentAVCurrentMCHannel}
Operating	Set RS-232 Baud Rate	[:]SYSTem[<channel>]:COMMunicate:SERial[:RECeive]:BAU	Configure the RS-232 baud rate	Yes
		D {1200240048009600…}
	Set RS-232 Flow Control	[:]SYSTem[<channel>]:COMMunicate:SERial[:RECeive]:PAC	Select type of flow control for RS-232	Yes
		E {HARDwareXONNONE}
Manual	Set Multichannel Address	[:]SYSTem[<channel>]:COMMunicate:MCHannel:ADDRess	Select the multichannel unit address	Yes
	(6000 W only)	<channel>
	Set GPIB Address	[:]SYSTem[<channel>]:COMMunicate:GPIB[:SELF]:ADDRess	Configure GPIB address	Yes
for		<GPIB_address>
	Set GPIB Power On	[:]SYSTem[<channel>]:COMMunicate:GPIB[:SELF]:PONSrq	Configure GPIB PON SRQ	Yes
XDC
	Service Request	{ONOFF01}
	Select Range for Analog	[:]SYSTem[<channel>]:COMMunicate:APRogram:LEVel	Select analog interface voltage levels	Yes
Series
	Programming Interface	{510}
Power	Set Remote Control	[:]SYSTem[<channel>]:REMote:STATe	RS-232 Only. Change remote control mode	Yes
	Operation (Serial	{LOCalREMoteRWLock}
	Interface)
Supply	Query SCPI Version	[:]SYSTem[<channel>]:VERSion?	Returns the SCPI version to which the	N/A
			instrument complies. Format is YYYY.V

SCPI Command Reference

SCPI Command Summary