Xantrex Technology XDC manual Models 80-150 100-120 150-80 300-40 600-20

Specifications and Characteristics

Electrical Specifications—Summary

Table E.7Specifications for 12000 Watt units (80V to 600V Models)

Models	80–150	100–120	150–80	300–40	600–20
Output Ratings:
Output Voltage 1	0–80 V	0–100 V	0–150 V	0–300 V	0–600 V
Output Current 2	0–150 A	0–120 A	0–80 A	0–40 A	0–20 A
Output Power	12000 W	12000 W	12000 W	12000 W	12000 W
Line Regulation: 3
Voltage (0.01% of Vmax)	8 mV	10 mV	15 mV	30 mV	60 mV
Current (0.1% of Imax)	150 mA	120 mA	80 mA	40 mA	20 mA
Load Regulation: 4
Voltage (0.05% of Vmax + 5 mV)	45 mV	55 mV	80 mV	155 mV	305 mV
Current (0.2% of Imax + 40 mA)	340 mA	280 mA	120 mA	100 mA	60 mA
Meter Accuracy:
Voltage (0.15% of Vmax)	120 mV	150 mV	225 mV	450 mV	900 mV
Current (0.5% of Imax)	750 mA	600 mA	400 mA	200 mA	100 mA
Output Noise (0–20 MHz):
Voltage (p–p)	100 mV	100 mV	150 mV	250 mV	350 mV
Output Ripple (rms):
Voltage	15 mV	20 mV	20 mV	30 mV	80 mV
Current 5	640 mA	460 mA	240 mA	100 mA	50 mA
OVP Adjustment Range:
(0% to 110% of Vmax)	0–88 V	0–110 V	0–165 V	0–330 V	0–660 V
Efficiency: 6	0.89	0.90	0.90	0.91	0.91

1.Minimum output voltage is <0.3% of rated voltage at zero output setting.

2.Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.

3.For input voltage variation over the AC input voltage range, with constant rated load.

4.For 0–100% load variation, with constant nominal line voltage.

5.Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.

6.Typical efficiency at nominal input voltage and full output power.

234 Operating Manual for XDC Series Power Supply