Operation

Power Supply Operation

Configure The USER LINES menu option lets you configure the auxiliary status lines User Lines The Auxiliary (Aux) lines are 2 open collector outputs that can be used to monitor

the status of the power supply. The auxiliary lines are referred to as AUX A and AUX B. See “Making Connections for Remote Control” on page 107 for details. Each user line also has a corresponding annunciator on the front panel display to indicate when it is on. Aux lines can be set up to report the following status conditions:

None

Unregul: Output Unregulated

OVP: Over-Voltage Condition

UV: Under-Voltage Condition

OC: Over-Current Condition

UC: Under-Current Condition

OP: Over-Power Condition

UP: Under-Power Condition

AC Off: Input power has failed or is out of range

OTP: Over-Temperature Condition

Hi Temp: High-Temperature Condition

SenseProt: Sense Protection Tripped

Fold Prot: Fold Protection Tripped

CC: Constant Current Mode

CV: Constant Voltage Mode

CP: Constant Power Mode

Out ON: Output On

Out OFF: Output Off

To access and work with the USER LINES menu option:

Step #

Do This

You Will See

1

MENU

ERROR MSGS

 

 

 

 

 

2

1

USER LINES

 

3

ENTER

Aux line A

 

 

 

 

 

4

or

to select which Aux line B

 

line to configure.

 

 

 

 

5

ENTER

Cfg None

1. You can also press MENU again to bring up the AUX LINES option.

Release 3.0

83

Page 85
Image 85
Xantrex Technology XDC manual None, To access and work with the User Lines menu option, To select which Aux line B