CONNECTION AND PREPARATION ___________
2Insert the card carefully into the »SD/MS/ MMC« card slot (under the front flap), with the contacts facing downwards until it latches in place.
Note:
–Do not exert force when inserting the card. Apply only slight pressure.
–The memory cards are resistant to dirt and moisture, but may only be inserted into the
–Never remove memory cards during operation. This can damage the memory card. This type of damage will invalidate your warranty.
Removing the memory card
1Switch off the
2Remove the memory card from the card slot by pressing the card inwards slightly until the latch is released. Then pull out the card.
Connecting an MP3 player or USB memory stick
The
1Switch off the
2Plug the USB cable of the MP3 player or the USB memory stick in the USB interface » (« (under the front flap).
Note:
Turn off the
Inserting batteries in the remote control
1Open the battery compartment by pressing the mark and pushing down the cover.
2When inserting the batteries (2 x 1.5 V, LR 03/AM 4/AAA), observe the polarity marked on the battery compartment.
Note:
If the device no longer reacts properly to remote control commands, the batteries may be flat. Always remove used batteries. The manufacturer accepts no liability for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should not be disposed of with household waste. Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area.
Switching on and off
1Switch the
– The last input source used is automatically selected.
2Press »ON/OFF « to switch the
Note:
The only way to disconnect the
14
