INFORMATION_______________________________________________
General information on laser devices
CLASS 1
LASER PRODUCT
Your system is a CLASS 1 LASER PRODUCT. This means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances.
Caution:
If operating devices or methods other than those specified here are employed, it may lead to dangerous exposure to emissions.
This device emits laser radiation. Because of the danger of eye injuries, the unit may only be opened or serviced by trained personnel.
If settings other than those specified here are employed or other procedures are carried out, this may lead to dangerous radiation exposure.
Troubleshooting
Not every kind of picture or sound interference is caused by a defect in your
Due to the difference in quality of the recording media and the quality of the recording itself, it can occasionally happen that a
Fault | Possible cause/remedy |
|
|
No sound. | The volume setting is too low – increase the volume. |
| The headphones are plugged in – disconnect the headphones. |
| The power cord is incorrectly connected. Connect it properly. |
| Mute is activated, deactivate mute setting. |
|
|
The remote control does not work. | The batteries are flat – replace the batteries. |
| The remote control is out of range of the device. |
|
|
Poor radio reception. | Weak antenna signal – reposition the wire antenna. |
| Weak FM stereo signal, switch to mono reception. |
| Interference from electrical devices such as televisions, video recorders, |
| computers, neon lamps, thermostats or motors. Keep the device away |
| from such equipment. |
|
|
Tracks on a CD are skipped. | The CD is damaged or dirty – replace the CD or clean it. |
| The PROGRAM (track memory) or RANDOM functions are active. |
| Deactivate the functions. |
|
|
28
