LIGHTING INSTRUCTIONS

WHITE - RODGERS GAS CONTROLS

1.STOP! Read the safety information at the head of this section.

2.Set the thermostat to lowest setting. (Rotate dial clock-wise).

3.Depress gas control slightly and turn clock-wise to “OFF”. If knob is in “ON” position, turn clock-wise to

“PILOT” then depress knob slightly and turn clock-wise to “OFF”.

4.Wait five (5) minutes to clear out any gas. If you smell gas, STOP! Follow “B” in the safety information at the head of this section. If you don’t smell gas, go to the next step.

5.Remove burner access cover located below the gas control unit.

6.Find pilot - follow small metal tubes from gas control. The pilot is located between the two centre burners.

7.Turn knob on gas control knob counter-clock-wise to “PILOT”

8.Depress control knob all the way and hold in. Immediately light the pilot with a match. Continue to hold the control knob down for about 1 minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 3,4,7 and 8.

If knob does not pop up when released, turn clock-wise to “OFF”, stop and immediately call your service technician or gas supplier.

If the pilot will not stay lit after several tries, turn the gas control knob “OFF” and call your service technician or gas supplier.

9.Replace burner access cover.

10.Turn gas control knob counter-clock-wise to “ON” position.

Set the thermostat to desired setting clock-wise.

BEFORE LIGHTING, SNIFF AT FLOOR LEVEL. IF YOU SMELL GAS, FOLLOW THESE RULES:

1.Get all people out of the building.

2.DO NOT light matches.

3.DO NOT TOUCH electrical switches (on or off)

4.DO NOT use an electric fan to remove gas from area.

5.SHUT OFF GAS at the LP tank outside of the building.

6.IMMEDIATELY call the LP Gas Company or the fire department from a neighbour’s telephone. Ask for instructions, before hanging up, give your name, address and telephone number.

7.DO NOT go back into the building. If help is coming, wait for it outside of the building.

GAS CONTROL KNOB (OFF-PILOT-ON)

TEMPERATURE

DIAL

WARNING:

Should overheating occur, or the gas supply

fail to shut off, turn the manual gas control to the

appliance to “OFF”.

WARNING:

HOTTER WATER INCREASES THE RISK

OF SCALD

To Turn Off Gas To Appliance

1. Set the thermostat to lowest setting.

2. Turn the gas control knob clock-wise to “PILOT”

3.Depress gas control knob slightly and turn clock-wise to

“OFF”. Do not use tools or excessive force.

Page 12

Page 12 Page 14
Page 13
Image 13
GSW G65 instruction manual Lighting Instructions White Rodgers GAS Controls, Hotter Water Increases the Risk Scald
Page 12 Page 14

G65 specifications

The GSW G65 is a notable entry in the world of heavy-duty machinery, specifically designed for tasks that demand reliability and performance under challenging conditions. At the forefront of its features is a powerful engine that ensures optimal performance with robust torque delivery. This machine is equipped with a high-efficiency, state-of-the-art powertrain that maximizes productivity while minimizing fuel consumption.

One of the standout characteristics of the GSW G65 is its exceptional lifting capacity, making it suitable for a variety of applications including construction, mining, and agricultural sectors. The G65 can lift and transport heavy loads with ease, enhancing operational efficiency. Safety is paramount, and the G65 incorporates advanced stability control systems, ensuring operators can work confidently even in difficult environments.

The GSW G65 also boasts cutting-edge technologies that elevate its performance standards. A sophisticated hydraulic system allows for smooth operation, enabling precise movements necessary for intricate tasks. This hydraulic innovation provides the machine with rapid response times and reduced downtime, vital components for any project requiring efficiency.

Furthermore, the G65 is designed with operator comfort in mind. The cabin includes ergonomic seating and intuitive controls, ensuring that operators can remain productive throughout their shifts without the burden of discomfort. Additionally, with advanced noise reduction features, the cabin environment is conducive to focus and safety.

Durability is a key attribute of the GSW G65. Built with high-strength materials, the machine is designed to withstand the rigors of demanding work environments. Its maintenance-friendly design allows for easy access to components, simplifying routine checks and servicing.

In terms of technology, the G65 comes equipped with a smart monitoring system that provides real-time feedback on performance metrics, helping operators stay informed of the machine's condition. This feature enhances preventative maintenance practices, reducing the likelihood of unexpected breakdowns.

Overall, the GSW G65 stands out as a formidable machine that blends power, efficiency, and advanced technology. Its robust features and focus on operator safety and comfort make it an indispensable tool in industries that require heavy lifting and reliability. The G65 is not just a machine; it represents a commitment to excellence and innovation in heavy-duty applications.
Top Page Image Contents