ELECTROGLIDE 11
MAINTENANCE AND CARE
Belt Replacement (continued)
5. Tilt cover to back. Press cover firmly until side tabs snap into place. Replace cover screws, light bulb and light cover.
Brush Replacement | Replace brushes when the brushes | |
1. | Remove the Electroglide | are worn to the level of the base |
| Powerhead cover, belt and | support bars. |
| brush assembly. |
|
2. | Remove brush supports, |
|
| washers, screws, end brush, |
|
| and brush sprocket pieces from |
|
| ends of brush assembly. |
|
3. | Reassemble brush assembly as |
|
| shown below. |
|
4. | Replace belt, brush assembly, |
|
| Electroglide Powerhead cover, |
|
| light bulb and light cover. |
|
|
| Base Support Bars |
Brush |
|
|
Sprocket |
|
|
Flange |
|
|
Brush |
|
|
Sprocket | End |
|
|
| |
| Brush | Brush |
|
| Support |
Washer |
| Screw |
|
| |
Brush |
|
|
Support |
|
|
Brushes |
|
|
Brush Dowel |
|
|
| Screw Washer | |
