Assembling Your HAAN® Steam Station™ & Deluxe Garment Valet
1 ➟ 2 ➟ 3 Ready to Steam
1 Insert the widest end of the telescoping pole into the base of the unit, aligning threads in the
base ring and turn the base ring until tightened
and flush with the base.
Threaded
Base Ring ➟
➟
2 Insert the hanger assembly to the top of the pole and press down until it is stable. The crossbar on the hanger locks into place at the center. Screw the lock tight against the center pole. Unscrew and lower sides for storage.
➟
| 3 The base of the canister and the floor |
|
| base fit together like pieces of a puzzle. |
|
| Snap the Steam Canister into the floor | Clasp |
| base by pulling the small black clasp back | |
| and then placing the unit into the clearly |
|
| designated slot. Release the clasp and the |
|
| canister is locked in place. Pull the base |
|
| “wings” out for stability. |
|
pg 6 | 877 - HAAN DIRECT / 877 - 422 - 6347 | www. H A A N USA . com |
