3650 Portable O2 Analyzer - Operating Information

19 of 50

 

 

Sample (sequence number of the sample)

Gas (concentration of the measured gas)

Date (date of the measurement)

Time (time of the measurement)

Sample Description

In the example shown in Fig 2-2, the Sample Description column shows Tank 1 for the first samples. These descriptions can be modified for your applications using the procedures described below.

2.4.2 Altering the Sampling Point Descriptions

For help in identifying the locations of various sampling points that are stored by the analyzer, you may choose the Sampling Point Description command from the Logger menu to bring up the dialog box illustrated in Fig 2-3.

Fig 2-3: Sampling Point Descriptions

The measurement values to be placed in positions 0 through 499 (identified as Text 0, Text 1... etc.) can be described however you wish. Double-click on a particular position (or click Modify), then type a description in the box as shown (e.g. Tank 3). Choose OK when finished entering a description.

When you Close this box, your modifications will be saved, and will appear in the Sample Description column for the next downloaded list. These descriptions can be modified again later as your requirements change.

2.4.3 Copying Values

To copy the results to the Windows Clipboard, so that the data can be pasted into a spreadsheet, word processor or other Windows program that accepts tabular text information, choose the Clipboard command from the Export menu.

Operator Manual

ORBISPHERE

Page 25
Image 25
Hach 3650 manual Altering the Sampling Point Descriptions, Copying Values