3650 Portable O2 Analyzer - Manual Overview | 3 of 50 |
|
|
Manual Overview
About this Manual
The information in this manual has been carefully checked and is believed to be accurate. However, Hach Ultra assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Hach Ultra be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. In the interest of continued product development, Hach Ultra reserves the right to make improvements in this manual and the products it describes at any time, without notice or obligation.
Published in Europe.
Copyright © 2007 by Hach Ultra. All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without the written permission of Hach Ultra.
Revision History
•Initial Release, November 1999, Orbisphere
•Revision A, July 2002, Orbisphere
•Revision B, July 2003, Hach Ultra Analytics
•Revision C, February 2006, Hach Ultra
•Revision D, March 2007, Hach Ultra
•Revision E, May 2007, Hach Ultra
Safety Conventions
WARNING
A warning is used to indicate a condition which, if not met, could cause serious personal injury and/or death. Do not move beyond a warning until all conditions have been met.
CAUTION:
A caution is used to indicate a condition which, if not met, could cause minor or moderate personal injury and/or damage to the equipment. Do not move beyond a caution until all conditions have been met.
Note:
A note is used to indicate important information or instructions that should be considered before operating the equipment.
Safety Precautions
Please read the entire manual before unpacking, setting up, or operating this instrument.
Pay particular attention to all warning and caution statements. Failure to do so could result in serious injury to the operator or damage to the equipment.
To ensure the protection provided by this equipment is not impaired, do not use or install this equipment in any manner other than that which is specified in this manual.
Operator Manual | ORBISPHERE |