Hach 3650 manual O2 Analyzer PC Connection, Reviewing Instrument Configuration

3650 Portable O2 Analyzer - Options Setup 25 of 50

3.2 O2 Analyzer - PC Connection

For the hardware connection of the analyzer to a PC, see “Instrument - PC Connection” on page 10.

The Configuration, Serial port menu lets you choose one of four serial communication ports, as follows:

Usually, COM1 is used to connect to a mouse, so try COM2 first. You may find that a separate SetUp program supplied with your PC is necessary to activate this port.

Click on OK to activate the selected port. If the port you have selected here is adequate, the WinLog97 program will return to the main menu. Otherwise, you will see an RS232 ERRORS message advising you to select another port.

Fig 3-7: Serial Port Configuration

3.3 Reviewing Instrument Configuration

To review if the analyzer is set up as expected, choose the Configuration, Configuration view command. You will see a window like the one illustrated in Fig 3-8.

Fig 3-8: Instrument Configuration

You may change a number of these settings using the WinLog97 program. The modifiable settings, and information relating to these settings are listed in the next section, “Configuring the Instrument” on page 26.

However, should you see any unexpected items listed on your screen which you are unable to correct, please contact your Hach Ultra representative.

Operator Manual ORBISPHERE