Operation
Cooling
A
|
| TEMP |
|
3 |
| ON | 3 |
|
| ||
| 1OFF | FAN | |
HEALTH |
| ||
|
| 5 | 4 |
| MODE | HEALTH AIRFLOW | |
2 | SLEEP | FRESH | SWING |
| CLOCK |
| SET |
| TIMER |
| STERILIZE |
| RESET | CODE LIGHT | LOCK |
1Press ON/OFF button Unit starts running.
The previous status appears on the display (except. TIMER, SLEEP mode)
2Press MODE button. For each press, operation mode changes as follows:
Remote | AUTO COOL DRY FAN HEAT |
controller |
Select cooling operation, Shows" 
"
Cooling operation starts.
3Select temp. button Press TEMP button
Every time the button is pressed, temp. setting increases 1
C
Every time the button is pressed, temp. setting decreases 1
C
If the button is kept pressed, setting will increase or decrease quickly.
4Press FAN button. For each press, fan speed changes as follows:
Remote
controller LOW MID HIGH AUTO
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor temperature.
5Press ON/OFF button
Unit stops running,and when entry this mode for the next time,it will show the previous setting.
10
