Instructions to installation
PRECAUTION
Execute proper grounding. Do not connect the earth wire to a gas pipe, water pipe, lightening rod, or a telephone ground wire. Improper placement of earth wires can result in electric shock.
An electric leakage breaker must be installed, otherwise electric shock or other accidents would occur. 
After completion of the installation, the air conditioner shall be electrified to check for electric leakage.
2. Preparation for installation
Installation tools
1 | Screw Driver (flat head, wabbler, triangle) | 8 | Pipe Expander |
|
|
|
|
2 | Steel Saw | 9 | Knives |
3 | 60mm Drill | 10 | Clippers |
4 | Inner Hexagon Spanner | 11 | Leakage Checker or Soap Liquid |
5 | Shifting Spanner | 12 | Measuring Tape |
6 | Spanner | 13 | Scraper or File |
7 | Pipe Cutter | 14 | Refrigeration Oil |
|
|
|
|
3. Accessories for installation
No. | A | B | C | D | E | F |
Name of | Adhesive | Connecting | Heat | Gypsum | Drain hose | |
Parts | Tape | tape | Hose | insulation | powder |
|
|
|
|
| material |
|
|
4. Choose the installation place
Install the indoor unit where the weight of the unit can be supported.
Install the indoor unit where the heat source and steam source are not close and the unit inlet and outlet are not blocked.
Install the indoor unit where the drainage is easy and the outdoor unit can be easily connected. Install the indoor unit where its cold air and hot air can be easily sent to all the comers of the room. Install the indoor unit where the power socket is near and there is sufficient space around the indoor unit.
Install the indoor unit where there is no T.V set, radio set, and wireless applian ce underneath, and the sunlight lamp is over one meter away.
If the remote controller is installed on the wall, the indoor unit shall be ensured to receive the signal while the sunlight lamp is on.
25
