17
A
Operation Timer on-off function
Remote controller operation TIMER ON-OFF
(1) After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
(2) TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
(3) Timer setting for TIMER ON
Press HOUR button.
Every time the button is pressed, time increases 10 min. If button is
kept pressed, time will change quickly.
Every time the button is pressed, time decreases 10 min. If button
is kept pressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refers to morning and PM to afternoon.
(4) Time confirming for TIMER ON
After time setting, press TIMER button to confirm," " stops blinking,
while " " starts blinking.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
ON
Remote
controller
ON ONOFF OFF
TIMER ON TIMER OFF TIMER ON-OFF
AM 12:00 PM 12:00 PM 12:00
AM 12:00 BLANK
OFF
(5) Time setting for TIMER OFF
Follow the same procedure in "Time setting for TIMER ON".
(6) Time confirming for TIMER OFF
After time setting, press SET button to confirm, " " stops flashing.
Time displayed: Unit start or stop at x hour x min
OFF
According to the Time setting sequence of TIMER ON or TIMER OFF,either ON-OFF or OFF-
ON can be achieved.
Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF
will flash.
2
3
STERILIZE
HEALTH AIRFLOW
FRESH
CODE
4
5
6
ON
OFF
TEMP
HEALTH FAN
MODE
SLEEP SWING
CLOCK
TIMER
SET
LOCK
LIGHT
RESET
1