Haier DE45EJ-L, DE65EJ-L, DE45EJ-T manual Control Panel, Features, English

FAMILIARIZE YOURSELF WITH THE CONTROLS ON YOUR DEHUMIDIFIER.

		°F
High	On	Hr.
Low	Off	Current
		humidity
SPEED		Set
	TIMER	humidity

BUCKET FULL

Auto Restart

POWER

ENGLISH

Control Panel

Features:

1Power

Press POWER once to turn the dehumidifier ON and press POWER again to turn the dehumidifier OFF.

2Humidistat

This allows you to adjust the humidity in the air. You can set the humidity to your desired level

by pressing and keys.

3Timer

Your dehumidifier can be set to turn on and off at pre-determined times. Pre-setting can be programmed up to 24 hours in advance.

4Two Fan Speeds

This key controls the fan speed. There are two speed levels, LOW and HIGH.

5Current Temp/Timer Set Display

When the dehumidifier is running, it displays the current temperature. Press the timer key to program the dehumidifier to turn on or off automatically at a pre-determined time.

6Current Humidity/Setting Humidity Display Displays the current humidity level and adjusts the humidity to a desired level.

Setting Humidity Range: 40%RH~70%RH

Display Humidity Range: (LO)30%RH~(HI)90%RH

7Bucket Full Indicator

When the indicator light comes on, automatic flow control stops the unit.

Turn the unit off by pressing the POWER key. Check to see if the bucket is full. If so, empty it.

If bucket is not full and indicator light is on, the bucket is not in the proper position. Remove and reinstall it.

8Auto Restart

Once the power is restored, after 3 minutes, the unit begins to operate at its previous operation setting depending on the humidity conditions.

NOTE: Auto-Defrost Sensor (built in) When the temperature is 60°F or lower, ice may form on the evaporator coils preventing the removal of moisture. When this occurs, the controller stops the compressor, but allows the fan to continue running. When the ice is no longer present, the compressor will restart.

5