15
Washing dishes

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as
well as the amount and condition of food remains, with the details contained in the wash cycle table.The
corresponding programme sequence, durat ion and c onsum ption details are shown in the right half of the
overview. For example:
Use the« normal» programme for dishes and utensils which have plenty of food r emains stuck on
hard.

Earn savings

If only a small number of d ishe s have b ee n load ed int o the di shwa sher, sel ectin g a prog ramm e tha t
operates at the next lowest temperature will usually be sufficient.

Programme data

The stated programme data are based on standard operating conditions. The values can vary consider-
ably according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g. temperature, water volume,...)

Switching the dishwasher ON

Turn on the tap.
Close the door after loading the appliance.
Set On-Off button to On. The state indicator "A" light.
Rotate the knob to select progr am m e y ou wis h, the time-
remaining indicator display the time of the programme you
selected. After 3 seconds the appliance emits a short warn-
ing signal, and start the programme ,the state indicator "A"
blinks .
Warning
When the dishwasher power on, the programme which the knob indicated
can not be carried out, you must Rotate the knob to another programme
and then back to it.
B
A
DF
C
G
E
I
H
en