Haier DW9-TFE3, DW9-UFE3 Installation

Positioning the appliance in the desired location. The back should rest against the wall behind it , and t he

sides, along the ad jac ent ca bi nets or wal l. T he dis hwas her is e quipp ed with w ate r s upply and d rain

hoses that can be positioned to the right or the left to facilitate proper installation.

Once the appliance is po sition ed, adjus t the fee t (s crewi ng them in or ou t) t o adjus t the di shwa sher ,

making it level. In any case, the appliance sho uld not be inclined more than 2˚. If the appliance is level, it

will help ensure proper performance.

Installation

fig.A

Connect the water supply h o se to a threaded 3/4 (gas) co n nec t or,

making sure that it is fastened tightly in place (see fig.A).

Some models are fitted wit h an "A quas top" wat er supply ho se

(see fig.B) in which the small filter is already housed in the

threaded end.

If the water pipes are new or have not been used for an extended

period of time, let the water r un to mak e sure t hat the water is

clear and free of impurities. If this precaution is not taken, there

is a risk that the water inlet can get blocked and damage the

appliance.

The dishwasher is equipped with a system that stops the supply of water in the event of a problem with the water

supply hose, or leaks within the unit, in order to prevent damage to your home. If for any reason the box

containing the electrical components happ ens to get dam aged, remove the plu g for th e appli ance from th e

socket immediately. In order to guarantee that the anti-flooding feature operates properly, the "A" box with water

supply hose must be attached to the water supply tap as shown in fig.B. No other type of con nection is acceptab le.

The water supply hose must not, under any circumstances, be cut, as it contains electrical parts which are live.

If the length of the hose is not adequate to make a proper connection, the hose must be replaced with one which

is long enough. This hose is available upon request from specialised retailers and service center.

fig.B

Warning

The appliance is to be connected to the

water mains using new hose-sets and

that old hose-sets should not be reused.