AIRCONDITIONERUSE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This keeps the air conditioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner in the Cool mode when outside temperature is below 61°F (16°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

StartingYourAirConditioner

1.Remove the clear plastic film from the control panel.

2.Press POWER to turn on the air conditioner. The Power indicator light will turn on.

NOTE: When the air conditioner is plugged in, the LED display will show “88” for 3 seconds. After the air conditioner is turned on for the first time, the display will show the current room temperature and the fan is set to Low speed. When the air conditioner is turned on at all other times, the display will show the previous settings for 5 seconds, and then show the current room temperature.

3.Select mode. See “Mode.”

4.Select fan speed. See “Fan Speed.”

5.Set temperature. See “Temperature.”

Energy Saver—Fan runs only when cooling is needed. Press SPEED to select High, Med or Low fan speed.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often.

Dehum—Dries the room. The air conditioner automatically selects the temperature.

NOTE:

Dehum mode should not be used to cool the room.

In Dehum mode,Please do not operate the speed button.

NOTE: After 5 seconds, display will show the current room temperature.

Fan Speed

1.Press FAN SPEED until you see the indicator light glow for the desired setting.

2.Choose High, Med or Low.

High—for maximum cooling

Med—for normal cooling

Low—for minimum cooling

Mode

1.Press MODE until you see the indicator light glow for the desired setting.

2.Choose Fan, Cool, Energy Saver or Dehum.

Fan—Only the fan runs. Press SPEED to select High, Med or Low fan speed. The display shows the current room temperature.

Cool—Cools the room. Press SPEED to select High, Med or Low fan speed. Press the TEMP/TIME up or down

arrow button to adjust the temperature.

NOTE: After 5 seconds, the display will show the current room temperature.

9

Page 9
Image 9
Haier ESA424J-L manual Airconditioneruse, StartingYourAirConditioner, Fan Speed, Mode

ESA424J, ESA424J-L specifications

The Haier ESA424J and ESA424J-L are standout air conditioning units designed to deliver efficient and effective cooling solutions for residential spaces. These models are particularly well-regarded for their performance, energy efficiency, and user-friendly features, making them ideal choices for homeowners looking for reliable climate control.

One of the primary features of the ESA424J and ESA424J-L is their cooling capacity. With a robust BTU rating, these air conditioners can effectively cool spaces up to a certain square footage, making them suitable for medium to large rooms. This capability ensures that users can enjoy a comfortable indoor environment even during the hottest summer months.

Energy efficiency is a significant hallmark of the Haier ESA424J series. These models boast an impressive Energy Efficiency Ratio (EER), which translates to lower energy consumption and reduced electricity bills. The implementation of advanced technologies allows these units to deliver cooling without excessive power usage, aligning well with modern energy-saving standards.

Both units feature a user-friendly interface, allowing for easy temperature adjustments and mode selections. The remote control provided with these models enhances convenience, letting users operate the air conditioner from across the room. Additionally, the quiet operation of the ESA424J and ESA424J-L ensures that users can maintain a peaceful environment while enjoying optimal cooling.

Another notable characteristic of these air conditioners is their versatile installation options. The Haier ESA424J and ESA424J-L are designed for window installation, making them suitable for various room layouts in apartments or houses. The compact design allows for efficient use of space without compromising on performance.

Additionally, these models are equipped with various cooling and airflow modes, including fan-only and dehumidification options. This adaptability allows users to customize their cooling experience according to specific needs, whether it’s circulating air or simply reducing humidity levels in the room.

In conclusion, the Haier ESA424J and ESA424J-L air conditioning units are defined by their impressive cooling capacity, energy efficiency, user-friendly controls, and versatile installation options. Combining effective cooling technologies with thoughtful design, these models stand out as reliable solutions for maintaining comfort in residential spaces all summer long.