Switchpack Locations, Switchpack S1 & S2 | Paradyne Hotwiret 7986

Switchpack Locations

Use the following illustration to locate Switchpacks S1 and S2.

Switchpack S1 & S2
1	ON	1	ON	Front
1	ON	1	ON
2		2
3		3
4		4
5		5	S2	S1
6		6	S2	S1
6		6
7		7
8		8
				Rear	98-16073

Hotwire 7986 Standalone Termination Unit Switchpack Locations

7986-A2-GZ40-00

March 1999

17

Image 17

Paradyne Hotwiret 7986 installation instructions Switchpack Locations, Switchpack S1 & S2

Contents

Product Documentation on the World Wide Web Installation Overview +24 Vdc Power Supply Pinouts Connecting Power to the Unit Connecting to a System Terminal Connecting to the NetworkConnecting to a DTE CO Site Network ConfigurationEntering Identity Information If you select Then Choosing a Configuration ModeConfiguring the Unit Using the Configuration Menus Select To Access To Configure Configuration Edit/Display Network Interface Options 703 Interface Options Communication Port Options 1 System Options Communication Port Options 2 Telnet Session Options Node Subnet Mask Possible Settings 000.000.000.000 ± Node IP Address Possible Settings 000.000.000.000 ±Default Network Destination Communication Protocol Options Name 1 Access Community Name Possible Settings Ascii text field, PublicName 2 Access General Snmp Management Options NMS IP Validation Access LevelSnmp NMS Security Options Snmp Traps Options Handling Precautions for STATIC-SENSITIVE Devices Configuring the Unit Using the Internal Switches Switchpack S1 & S2 Switchpack Locations Switchpack S1 Definitions Switch # Allows you to OFF = AutoRate Disabled Switchpack S2 Definitions Switch # Allows you toAll OFF = OFF = Current Firmware Important Safety Instructions EMI Warnings Warranty, Sales, Service, and Training Information Copyright E 1999 Paradyne Corporation Asynchronous Terminal Interface MenuDocument Feedback