Paradyne Hotwiret 7986 Configuration Edit/Display, Select To Access To Configure

Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current, customer, or default configuration is loaded. To access the Configuration Edit/Display screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration

± or ±

Main Menu → Configuration → Default Factory

main/config/edit	Hotwire
	Model: 7986

CONFIGURATION EDIT/DISPLAY

Network

G.703

System Options

Communication Port

Management and Communication

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Select . . .	To Access the . . .	To Configure the . . .
Network	Network Interface Options, Table 1	DSL network interfaces on
		the unit.
G.703	G.703 Interface Options, Table 2	G.703 interface.
System Options	System Options, Table 3	General system options of
		the unit.
Communication	Communication Port Options, Table 4	Unit's COM port options.
Port
Management	￿ Telnet Session Options, Table 5	Management support of the
and	￿ Communication Protocol Options,	unit through SNMP and
Communication		Telnet.
	Table 6
	￿ General SNMP Management
	Options, Table 7
	￿ SNMP NMS Security Options,
	Table 8
	￿ SNMP Traps Options, Table 9

6 March 1999 7986-A2-GZ40-00