Table 1. Network Interface Options
Margin Threshold
Possible Settings: ±5db, ±4db, ±3db, ±2db, ±1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db, 7db, 8db, 9db, 10db
Default Setting: 0db
Determines the level, expressed in decibels, at which a
Excessive Error Rate Threshold
Possible Settings: 1E±4, 1E±5, 1E±6, 1E±7, 1E±8, 1E±9
Default Setting: 1E±6
Determines the error rate at which an excessive error rate (EER) condition is recognized. The rate is the ratio of the number of CRC errors to the number of bits received in a certain period.
AutoRate
Possible Settings: Enable, Disable
Default Setting: Disable
Determines whether the unit automatically adjusts to the best line rate for conditions, or is fixed at the rate in the DSL Line Rate field.
AutoRate is only available when the unit is configured as an LTU.
DSL Line Rate
Possible Settings: 400, 528, 784, 1040, 1552, 2064
Default Setting: 2064
Determines the fixed line rate of the LTU, in kbps.
DSL Line Rate is only available when the unit is configured as an LTU, and AutoRate is set to Disable.
Peer IP Address (LTU Only)
Possible Settings: 000.000.000.001 ± 223.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the peer IP address for the NTU, to provide remote management providing the remote management link on the DSL loop.
Peer IP Address is only available when the standalone unit is configured as an LTU.
Circuit Identifier
Possible Settings: [ASCII Text], Clear
Default Setting: [blank]
Uniquely identifies the circuit number of the transmission vendor's DSL line for troubleshooting purposes.
March 1999 | 7 |
