Haier HPU-90CA03T3 AUTO, COOL , HEAT and DRY Operation, Unit start, Select operation mode

Operation

AUTO, COOL , HEAT and DRY Operation

LOCK

MODE TEMP TEMP FAN ON/OFF

4 5

1. Unit start

Press ON/OFF button,unit starts.

Previous operation status appears on LCD (except for TIMER,SLEEP and SWING setting)

2.Select operation mode

Press MODE button. At each press, operation mode changes as follows:

AUTO COOL DRY HEAT FAN

Then select AUTO run or select COOL operation or select DRY operation or select HEAT operation or select FAN operation

3.Temperature setting

Press TEMP button.

Every time the button is pressed, temp. setting increases 1 C; if the button is kept pressed, temp. setting will increase quickly.

Every time the button is pressed, temp. setting decreases 1 C, if the button is kept pressed, temp. setting will decrease quickly.

Set proper temperature

4.Adjust FAN button

Press FAN button. At each press, fan speed changes as follows:

AUTO(Flash) LOW MID HIGH

Air conditioner will run at the selected fan speed.

COOL operation starts when room temp.is higher than temp. setting.

Temp. setting +2C

Temp.setting

Ultra-low air flow

5. Unit stop

Press ON/OFF button,unit stops.

On reaching temp.setting +2 C, unit will run in mild DRY mode.

In FAN mode, the temperature setting is not displayed on LCD,and "Auto Fan" not available.

In DRY mode, when room temperature becomes 2 C higher than temperature setting, unit will run intermittently at LOW speed regardless of FAN setting. When room temperature is lower than temperature setting, unit will only run FAN operation.

In HEAT mode,warm air will blow out after a short period of time due to cold-draft prevention function. In Auto mode,unit will adjust fan speed according to room temperature automatically.

5