Installation Sequences
3.Put the refrigerator into the cabinet
1.Put the refrigerator into cabinet, donÕt squeeze the cord. Damaged power cord may cause fire disaster.
2.Connect the power.
(If the socket is at the back of the cabinet, first connect the power before put the refrigerator cabinet into its place.)
3.For safeties, put the power switch in off position, and the switch of the whole room as well.
Installation Sequences
The front of the refrigerator cabinet door shall be adjusted by square or steel rule and ÒAÓ and ÒBÓ shall be the same.
Draw the cord from the hole at the back of the refrigerator cabinet.
Put the refrigerator into the cabinet.
The
The front of the upper fixing plate shall align with the end surface of the side panel.
The left and right clearance between refrigerator and the cabinet shall be kept the same.
Adjust hex screw to adjust the refrigeratorÕs height, and adjust the uprightness and horizon. (Screwdriver can be found in the installation kit.)
upper surface
(Plane Diagram) 
Refrigerator cabinet
Refrigerator Door
Square
Position
Adjustment
ÒBÓ 
Upper surface (Plane Diagram)
ÒAÓ
| End surface of clearance |
Front line of side surface | adjusting sheet |
| |
Upper fixing plate | |
The side surfaces of hinge shall be fastened by screws _.
(2 pieces: 1 screw is fastened on the first hinge, and another one on the 4th hinge)
Fasten the other hole on hinges after installation of the refrigerator door.
34
11foot cover is put at the back of the foot, and fasten its left side by wood screw. (1 piece)
Fasten the other parts of the foot after the refrigerator door is installed.
35
