Haier HSU-12LH13 Auto Operation, Remote controller, Unit start, Select operation mode, Unit stop

Operation

Auto Operation

1. Unit start

Remote controller

Press ON/OFF on the remote controller, unit starts.

2.Select operation mode

Press MODE button. For each press, operation mode changes as follows:

Remote controller:

FRESH

STERILIZE

AUTO COOL DRY FAN

Then Select Auto operation

3.Select temp.setting

Press TEMP. button

Every time the button is pressed, temp.setting increase 1C,if kept depressed, it will increase rapidly

Every time the button is pressed, temp.setting decrease 1C,if kept depressed, it will decrease rapidly

Select a desired temperature.

4.Fan speed selection

Press FAN button. For each press, fan speed changes as follows:

Remote controller:

LOW MED HI AUTO

Air conditioner is running under displayed fan speed. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.

5.Unit stop

Press ON/OFF button, the unit stops.

About Auto Operation

Under the mode of auto operation, air conditioner will automatically select Cool or Dry operation according to room temperature and setting temperature.

9