Haier HSU-09LH13 Dry Operation, Remote controller, Unit start, Select operation mode, Unit stop

Operation

Dry Operation

Remote controller

FRESH

STERILIZE

COOL operation starts when room	Ultra-low air flow
temp.is higher than temp.setting.

Temp.setting+2oC

Temp.setting

On reaching temp.setting +2oC unit will run in mild DRY mode.

1. Unit start

Press ON/OFF on the remote controller, unit starts.

2.Select operation mode

Press MODE button. For each press, operation mode changes as follows:

Remote controller:

AUTO COOL DRY FAN

Then Select DRY operation

3.Select temp.setting

Press TEMP. button

Every time the button is pressed, temp.setting increase 1oC,if kept depressed, it will increase rapidly

Every time the button is pressed, temp.setting decrease 1oC,if kept depressed, it will decrease rapidly

Select a desired temperature.

4.Fan speed selection

Press FAN button. For each press, fan speed changes as follows:

Remote controller:

LOW MED HI AUTO

Air conditioner is running under displayed fan speed. In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently at LOW speed regardless of FAN setting.

5.Unit stop

Press ON/OFF button, the unit stops.

11