Operation
Cool Operation | Display panel |
Remote controller
1. Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow).
2.Select operation mode
Press MODE button. For each press, operation mode changes as follows:
Remote controller:
| AUTO | COOL | DRY | FAN | HEAT |
|
Then
Select COOL operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will increase rapidly
Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will decrease rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
Remote controller:
| LOW | MED | IH | AUTO |
|
Air conditioner is running under displayed fan speed When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.
5.Unit stop
Press ON/OFF button, the unit stops.
10
