Operation
Timer On/Off Operation
Remote Controller
Display panel
Set clock correctly before starting TIMER operation.
1.After unit starts, select your desired operation mode Operation mode will be displayed on LCD.
2. Timer mode selection
Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: Remote controller:
|
| BLANK |
TIMER ON | TIMER OFF | TIMER |
Then select your desired TIMER mode (TIMER ON or | ||
TIMER OFF). " | "or " | "will flash. |
3.Time setting |
|
|
Press HOUR | button. |
Every time the button is pressed, time setting increases 1 min , if kept depressed, it will increas rapidly.
Every time the button is pressed, time setting decreases 1 min, if kept depressed, it will decrease rapidly.
It can be adjusted within 24 hours.
4.Confirming your setting |
| ||
After setting correct time, | press SET button to confirm | ||
" | "or" | "on the | remote controller stops flash |
Time displayed: Unit starts | or stops at x hour x min. | ||
(TIMER ON or TIMER OFF). |
|
5.Cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints:
After replacing batteries or a power failure happens, time setting should be res Remote controller possesses memory function, when use TIMER mode next time,just press SET button after mode selecting if time setting is the same as previous on
16