Auto SP→EP Timer
If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length.
For Example . . .
Recording a program of 140 minutes in length onto a 120- minute tape
Approximately 110 minutes | Approximately 30 minutes |
SP mode | EP mode |
Total 140 minutes
Make sure you set "AUTO SP→EP TIMER" to “ON” at the Function screen before the timer recording starts.
|
| ACCESS MAIN MENU |
|
| |
1 |
| SCREEN |
|
|
|
| Press MENU. |
|
|
| |
|
| ACCESS FUNCTION SET | |||
2 |
| SCREEN |
|
|
|
| Move the highlight bar (arrow) to "FUNCTION SET" by | ||||
| pressing CH 5° or SHUTTLE PLUS %Þ, then press OK | ||||
| or SHUTTLE PLUS%. |
|
|
| |
|
|
| → |
|
|
|
| SELECT AUTO SP EP |
|
| |
3 |
| TIMER SET MODE |
|
| |
| Move the highlight bar | FUNCTION |
|
| |
| (arrow) to "AUTO SP→EP |
|
| ||
| AUTO PICTURE | ON | |||
| TIMER" by pressing CH | ||||
| PICTURE CONTROL | AUTO | |||
|
| 5° or SHUTTLE PLUS | AUTO TIMER | OFF | |
|
| %Þ, then press OK or | SUPERIMPOSE | ON | |
|
| SHUTTLE PLUS%to set to | =AUTO SP=EP TIMER | ON | |
|
|
|
| ||
|
| "ON". | NEXT PAGE |
|
|
|
| SELECT WITH (5,°) AND (OK) |
| ||
|
|
|
| ||
|
|
| PRESS (MENU) TO END |
|
|
|
|
|
|
|
|
|
| RETURN TO NORMAL |
|
| |
4 |
| SCREEN |
|
|
|
| Press MENU. |
|
|
| |
|
|
|
|
|
|
NOTES:
●If you have programmed the VCR to timer-record 2 or more
programs, the second program and those thereafter may not fit on the tape though you set the Auto SP→EP Timer mode to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.
●In order to ensure that the recording fits on the tape, this feature may leave a slight
●There may be some noise at the point on the tape where the VCR switches from SP to EP mode.
●The Auto SP→EP Timer feature is not available during ITR (Instant Timer Recording), and the feature will work with the
following tapes:
EN
43
Auto Timer
When the Auto Timer is set to ON the timer is automatically engaged when the VCR's power is turned off. It is automatically disengaged when the VCR is powered back on.
|
| ACCESS MAIN MENU |
|
| |
1 |
| SCREEN |
|
|
|
| Press MENU. |
|
|
| |
|
| ACCESS FUNCTION SET | |||
2 |
| SCREEN |
|
|
|
| Move the highlight bar (arrow) to "FUNCTION SET" by | ||||
| pressing CH5° or SHUTTLE PLUS%Þ, then press OK | ||||
| or SHUTTLE PLUS%. |
|
|
| |
|
| SELECT AUTO TIMER SET | |||
3 |
| MODE |
|
|
|
| Move the highlight bar | FUNCTION |
|
| |
| (arrow) to "AUTO TIMER" |
|
| ||
|
|
|
| ||
| by pressing CH5° or | AUTO PICTURE | ON | ||
| PICTURE CONTROL | AUTO | |||
|
| SHUTTLE PLUS%Þ, then |
|
| |
|
| =AUTO TIMER | OFF | ||
|
| press OK or SHUTTLE | SUPERIMPOSE | ON | |
|
| PLUS%to set to "ON" or | AUTO SP=EP TIMER | ON | |
|
| "OFF". | NEXT PAGE |
|
|
|
| SELECT WITH (5,°) AND (OK) |
| ||
|
|
|
| ||
|
|
| PRESS (MENU) TO END |
|
|
|
|
|
|
|
|
|
| RETURN TO NORMAL |
|
| |
4 |
| SCREEN |
|
|
|
| Press MENU. |
|
|
| |
|
|
|
|
|
|
NOTE:
For safety, when AUTO TIMER is set to “OFF”, all other VCR functions are disabled while the Timer mode is engaged. To disengage the timer, press TIMER.
