JVC HR-VP674U manual VCR Plus+ Timer Programming, Number, EN Timer Recording

36ENTIMERRECORDING

VCR Plus+

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. (☞ pg. 36 or 40)

The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCodes are the numbers next to the programs in most TV listings.)

1	LOAD A CASSETTE
	Make sure the record safety tab is present.
	● The VCR’s power comes on automatically.
2	ACCESS VCR PLUS+ SCREEN
	Press PROG. on the	VCR PLUS+
	remote control.
	● The clock must be set in
	order to access the VCR
	Plus+ screen. If you
		PRESS NUMBER KEY (0–9)
	haven’t set the clock, the
		PRESS (+/–) TO SET
	Main Menu screen		EXPRESS PROGRAMMING
	appears after an error	PRESS (PROG.) TO END
	message is displayed.
	Refer to page 8 for the Plug & Play procedure or page
	11 for the clock setting procedure.
3	ENTER PLUSCODE NUMBER
	Press the appropriate	VCR PLUS+
	NUMBER keys to enter the
	PlusCode number printed	123
	in the TV listings for the
	TV program you wish to

CANCEL

PROG.

1 2 3

4 5 6

7 8 9

0

1

2

4

NUMBER

	record and press OK.
		PRESS NUMBER KEY (0–9)
	If the Guide Channel Set
	screen appears, go to step 4.	THEN (OK)
		PRESS (PROG.) TO END
	If the VCR Plus+ Program
	screen appears, go to step 5.
	● To make corrections, press CANCEL and input the
	correct PlusCode number.
	INPUT RECEIVING CHANNEL
	NUMBER
	The Guide Channel	GUIDE CHANNEL SET
	Number, which is assigned
4 to the TV or cable station		GUIDE CH: 12
		VCR CH : –––
	for the PlusCode number
	that you entered in step 3,

OK

SHUTTLE PLUS

will appear automatically
	PRESS NUMBER KEY (0–9)
on the Guide Channel Set
	OR (5,°), THEN (OK)
screen. Input the number
	PRESS (PROG.) TO END
of the channel on which
the broadcast for the PlusCode number is received on
the VCR or cable box using the NUMBER keys, CH 5°
or SHUTTLE PLUS %Þ, then press OK.
● The Guide Channel Set screen appears only when
you input the PlusCode number of a station for which
the Guide Channel number has not been set already.
● If you receive your channels with a cable box and if
you have properly set your Controller, "CABLE CH"
appears in place of "VCR CH". If not, refer to pages
16 – 18.